View FTR-K1AL018W-LB-RG_3917451.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ftr-k1 series (a) series name ftr-k : ftr-k series (b) contact arrangement a : form a (spst-no) c : form c (spdt) (standard type "k" only) (c) coil type / enclosure k : standard (400 mw) l : high sensitive (250mw) (d) nominal voltage 005 : 5 vdc, 006 : 6vdc, 009 : 9vdc 02 : 2vdc 0 8 : 8 vdc (standard type only) 022 :022vdc (standard type only), 024 : 24vdc, 028 : 28vdc 048 : 48vdc (e) contact material w : silver tin oxide (applicable for form c) t : silver tin oxide (applicable for 6a form a) e : silver nickel (90/0) (f) contact rated current nil : 6a ma : 2a and 3.5mm pitch mb : 2a and 5.0mm pitch la : 0a and 3.5mm pitch lb : 0a and 5.0mm pitch (g) special designation rg : transparent cover n features l 0a / 2a/ 6a l transparent cover l low profle (height: 15.7mm) l high isolation5 insulation distance (between coil and contacts): 0mm min. dielectric strength: 5kv surge strength: 0kv l low coil power (400mw) l cadmium free contacts l safety standards ul, csa, vde, semko approved ul, csa tv-5 rating approved ( form a type) l rohs compliant since production l ul f class isolation l vde glow-wire ignitablility test 775 (iec60335-1) approved actual marking does not carry the type name : "ftr" e.g.: ordering code: ftr-kck0 2w actual marking: kck02w power relay 1 pole - 16a transparent cover ftr-k1 series rohs compliant n ordering information ftr-k c k 005 w C ma -rg [example] (a) (b) (c) (d) (e) (f ) (g)
2 ftr-k1 series n part numbers ordering part number series contact coil power coil voltage contact material cur - rent special ftr-k ak005t-rg ftr-k a: form a k: 400 mw 5 t: silver tin oxide w: silver tin oxide nil: 6a rg: transparent cover ftr-k ak006t-rg 6 ftr-k ak009t-rg 9 ftr-kak0 2t-rg 2 ftr-kak0 8t-rg 8 ftr-k ak022t-rg 22 ftr-k ak024t-rg 24 ftr-k ak028t-rg 28 ftr-k ak048t-rg 48 ftr-k ck005w-rg c: form c 5 ftr-k ck006w-rg 6 ftr-k ck009w-rg 9 ftr-kck0 2w-rg 2 ftr-kck0 8w-rg 8 ftr-k ck022w-rg 22 ftr-k ck024w-rg 24 ftr-k ck028w-rg 28 ftr-k ck048w-rg 48 6a and silver tin oxide ordering part number series contact coil power coil voltage contact material cur - rent special ftr-kak005e-rg ftr-k a: form a k: 400 mw 5 e: silver nickel (90/0) nil: 6a rg: transparent cover ftr-kak006e-rg 6 ftr-kak009e-rg 9 ftr-kak02e-rg 2 ftr-kak08e-rg 8 ftr-kak022e-rg 22 ftr-kak024e-rg 24 ftr-kak028e-rg 28 ftr-kak048e-rg 48 ftr-kck005e-rg c: form c 5 ftr-kck006e-rg 6 ftr-kck009e-rg 9 ftr-kck02e-rg 2 ftr-kck08e-rg 8 ftr-kck022e-rg 22 ftr-kck024e-rg 24 ftr-kck028e-rg 28 ftr-kck048e-rg 48 6a and silver nickel
3 ftr-k1 series ordering part number series contact coil power coil voltage contact material cur - rent special ftr-k ak005w-ma-rg ftr-k a: form a k: 400 mw 5 w: silver tin oxide ma: 2a rg: transparent cover ftr-k ak006w-ma-rg 6 ftr-k ak009w-ma-rg 9 ftr-kak0 2w-ma-rg 2 ftr-kak0 8w-ma-rg 8 ftr-k ak022w-ma-rg 22 ftr-k ak024w-ma-rg 24 ftr-k ak028w-ma-rg 28 ftr-k ak048w-ma-rg 48 ftr-k ck005w-ma-rg c: form c 5 ftr-k ck006w-ma-rg 6 ftr-k ck009w-ma-rg 9 ftr-kck0 2w-ma-rg 2 ftr-kck0 8w-ma-rg 8 ftr-k ck022w-ma-rg 22 ftr-k ck024w-ma-rg 24 ftr-k ck028w-ma-rg 28 ftr-k ck048w-ma-rg 48 2a, 3.5mm pitch and silver tin oxide ordering part number series contact coil power coil voltage contact material cur - rent special ftr-kak005e-ma-rg ftr-k a: form a k: 400 mw 5 e: silver nickel (90/0) ma: 2a rg: transparent cover ftr-kak006e-ma-rg 6 ftr-kak009e-ma-rg 9 ftr-kak02e-ma-rg 2 ftr-kak08e-ma-rg 8 ftr-kak022e-ma-rg 22 ftr-kak024e-ma-rg 24 ftr-kak028e-ma-rg 28 ftr-kak048e-ma-rg 48 ftr-kck005e-ma-rg c: form c 5 ftr-kck006e-ma-rg 6 ftr-kck009e-ma-rg 9 ftr-kck02e-ma-rg 2 ftr-kck08e-ma-rg 8 ftr-kck022e-ma-rg 22 ftr-kck024e-ma-rg 24 ftr-kck028e-ma-rg 28 ftr-kck048e-ma-rg 48 2a, 3.5mm pitch adn silver nickel
4 ftr-k1 series ordering part number series contact coil power coil voltage contact material cur - rent special ftr-k ak005w-mb-rg ftr-k a: form a k: 400 mw 5 w: silver tin oxide ma: 2a rg: transparent cover ftr-k ak006w-mb-rg 6 ftr-k ak009w-mb-rg 9 ftr-kak0 2w-mb-rg 2 ftr-kak0 8w-mb-rg 8 ftr-k ak022w-mb-rg 22 ftr-k ak024w-mb-rg 24 ftr-k ak028w-mb-rg 28 ftr-k ak048w-mb-rg 48 ftr-k ck005w-mb-rg c: form c 5 ftr-k ck006w-mb-rg 6 ftr-k ck009w-mb-rg 9 ftr-kck0 2w-mb-rg 2 ftr-kck0 8w-mb-rg 8 ftr-k ck022w-mb-rg 22 ftr-k ck024w-mb-rg 24 ftr-k ck028w-mb-rg 28 ftr-k ck048w-mb-rg 48 2a, 5.0mm pitch and silver tin oxide ordering part number series contact coil power coil voltage contact material cur - rent special ftr-kak005e-mb-rg ftr-k a: form a k: 400 mw 5 e: silver nickel (90/0) mb: 2a rg: transparent cover ftr-kak006e-mb-rg 6 ftr-kak009e-mb-rg 9 ftr-kak02e-mb-rg 2 ftr-kak08e-mb-rg 8 ftr-kak022e-mb-rg 22 ftr-kak024e-mb-rg 24 ftr-kak028e-mb-rg 28 ftr-kak048e-mb-rg 48 ftr-kck005e-mb-rg c: form c 5 ftr-kck006e-mb-rg 6 ftr-kck009e-mb-rg 9 ftr-kck02e-mb-rg 2 ftr-kck08e-mb-rg 8 ftr-kck022e-mb-rg 22 ftr-kck024e-mb-rg 24 ftr-kck028e-mb-rg 28 ftr-kck048e-mb-rg 48 2a, 5.0mm pitch and silver nickel
5 ftr-k1 series ordering part number series contact coil power coil voltage contact material cur - rent special ftr-k al005w-la-rg ftr-k a: form a l: 250 mw 5 w: silver tin oxide la: 0a rg: transparent cover ftr-k al006w-la-rg 6 ftr-k al009w-la-rg 9 ftr-kal0 2w-la-rg 2 ftr-kal0 8w-la-rg 8 ftr-k al024w-la-rg 24 ftr-k al048w-la-rg 48 0a, 3.5mm pitch and silver tin oxide 0a, 3.5mm pitch and silver nickel ordering part number series contact coil power coil voltage contact material cur - rent special ftr-kal005e-la-rg ftr-k a: form a l: 250 mw 5 w: silver nickel (90/0) la: 0a rg: transparent cover ftr-kal006e-la-rg 6 ftr-kal009e-la-rg 9 ftr-kal02e-la-rg 2 ftr-kal08e-la-rg 8 ftr-kal024e-la-rg 24 ftr-kal048e-la-rg 48 ordering part number series contact coil power coil voltage contact material cur - rent special ftr-k al005w-lb-rg ftr-k a: form a l: 250 mw 5 w: silver tin oxide lb: 0a rg: transparent cover ftr-k al006w-lb-rg 6 ftr-k al009w-lb-rg 9 ftr-kal0 2w-lb-rg 2 ftr-kal0 8w-lb-rg 8 ftr-k al024w-lb-rg 24 ftr-k al048w-lb-rg 48 0a, 5.0mm pitch and silver tin oxide 0a, 5.0mm pitch and silver nickel ordering part number series contact coil power coil voltage contact material cur - rent special ftr-kal005e-lb-rg ftr-k a: form a l: 250 mw 5 w: silver nickel (90/0) lb: 0a rg: transparent cover ftr-kal006e-lb-rg 6 ftr-kal009e-lb-rg 9 ftr-kal02e-lb-rg 2 ftr-kal08e-lb-rg 8 ftr-kal024e-lb-rg 24 ftr-kal048e-lb-rg 48
6 ftr-k1 series n coil data chart coil voltage nominal voltage (vdc) max. coil voltage* coil resistance (0%) must operate voltage* 2 must release voltage* 2 nominal power (mw) 005 5 2.2 vdc 62 ? 3.5 vdc 0.5 vdc 400 006 6 14.7 vdc 90 ? 4.2 vdc 0.6 vdc 009 9 22.0 vdc 202 ? 6.3 vdc 0.9 vdc 02 2 29.4 vdc 360 ? 8.4 vdc .2 vdc 08 8 44. vdc 810 ? 2.6 vdc .8 vdc 022 22 53.9 vdc 1,210 ? 5.4 vdc 2.2 vdc 024 24 58.8 vdc 1,440 ? 6.8 vdc 2.4 vdc 028 28 68.6 vdc 1,960 ? 9.6 vdc 2.8 vdc 048 48 117.6 vdc 5,360 ? 33.6 vdc 4.8 vdc 430 note: all values in the table are measured at 20c. *: no contact current at 20c *2: specifed values are subject to pulse wave voltage n specifications item ftr-k ak ( ) (t, w)-rg ftr-k ck ( )(w, e)-rg contact arrangement form a from c material t, w: silver tin oxide, e: silver nickel confguration single resistance (initial) maximum 100 m? at 1 a, 6 vdc rating 6 a, 250 vac / 24 vdc maximum carrying current* 6 a maximum switching rating 4,000 va / 384w maximum switching voltage 440 vac / 300vdc maximum switching load*2 0 ma 5 vdc coil nominal power (at 20oc) 400mw (at 430mw 48v coil) operate power (at 20oc) 200 mw (20mw at 48v coil) operating temperature -40oc to +70oc (no frost) time value operate (without diode) maximum 5ms (at nominal voltage, no bounce) release (without diode) maximum 5ms (at nominal voltage, no bounce) life mechanical 20 x 0 6 operations minimum electrical ac contact rating 00 x 0 3 operations min. 50 x 0 3 operations min. dc contact rating 00 x 0 3 operations min. 30 x 0 3 operations min. other vibration resistance misoperation 10 to 55 hz, at double amplitude of 0.7 mm endurance 0-55hz, at double amplitude of .5 mm shock resistance misoperation min. 00m/s 2 ( ms) endurance min. ,000m/s 2 (6ms) weight approximately 3g * need to consider the head from pcb when max. current is more than 0a. * 2 minimum switching loads mentioned above are reference values. please perform the confrmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 16a
7 ftr-k1 series n specifications item ftr-kak ( )(w, e)-(ma, mb)-rg ftr-kck( )(w, e)-(ma, mb)-rg contact arrangement form a from c material w: silver tin oxide, e: silver nickel confguration single resistance (initial) maximum 100 m? at 1 a, 6 vdc rating 2 a, 250 vac / 24 vdc maximum carrying current* 4 a maximum switching rating 3,000 va / 288w maximum switching voltage 440 vac / 300vdc maximum switching load*2 0 ma 5 vdc coil nominal power (at 20oc) 400mw (at 430mw 48v coil) operate power (at 20oc) 200 mw (20mw at 48v coil) operating temperature -40oc to +70oc (no frost) time value operate (without diode) maximum 5ms (at nominal voltage, no bounce) release (without diode) maximum 5ms (at nominal voltage, no bounce) life mechanical 20 x 0 6 operations minimum electrical ac contact rating 00 x 0 3 operations min. dc contact rating 00 x 0 3 operations min. other vibration resistance misoperation 10 to 55 hz, at double amplitude of 0.7 mm endurance 0-55hz, at double amplitude of .5 mm shock resistance misoperation min. 00m/s 2 ( ms) endurance min. ,000m/s 2 (6ms) * need to consider the head from pcb when max. current is more than 0a. * 2 minimum switching loads mentioned above are reference values. please perform the confrmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n insulation item ftr-k note resistance (initial) minimum 1,000 m? 1 min. at 500 vdc dielectric strength open contacts ,000 vac (50/60 hz) min. coil and contacts 5,000 vac (50/60 hz) min. surge voltage (coil and contact) 0,000 v .2 x 50s standard wave clearance/creepage 0 mm / 0 mm insulation (din en680- vde0435) voltage pollution isolation material group 250 v 3 iiia isolation category / reference voltage (vde0 0b) c / 250 v 12a
8 ftr-k1 series type compliance contact rating ftr-kak ( ) (t,e)-rg ftr-kck ( ) (t,e)-rg ul ul 508 e6364 flammability: ul 94-vii (plastics) 16a, 277 vac (cos?=1) 6a, 24 vac (0ms) 1 hp, 277vac /2 hp, 25vac pilot duty: a300 tv-5, 20vac (only t-type) 16a, 277 vac (cos?=1) 1 hp, 277vac /2 hp, 25vac /8 hp, 25vac pilot duty: b300 csa c22.2 no. 4 lr 40304 vde 0435, 0631, 0700, 0860 16a, 250 vac (cos?=1) 3.5a, 250 vac (cos?=0.4) 6 a 24vdc (0ms) 5a/80a, 250 vac (only t-type) 16a, 250 vac (cos?=1) 3.5a, 250 vac (cos?=0.4) 6a 24vdc (0ms) semko en 6058-:992 and a en 6095:993 and a+a 250vac, 16 (3)a 40t70 5a/80a 250vac (only t-type) 250vac, 16(3)a40t70 n safety standards complies with nemko, demko, fimko 16a type compliance contact rating ftr-kak ( ) (w,e)(ma, mb)-rg ftr-kck ( ) (w,e)(ma, mb)-rg ul ul 508 e6364 flammability: ul 94-vii (plastics) 12a, 277 vac (cos?=1) 2a, 24 vac (0ms) 1 /2hp, 277vac /3 hp, 25vac pilot duty: b300 csa c22.2 no. 4 lr 40304 vde 0435, 0631, 0700, 0860 12a, 250 vac (cos?=1) 3.5a, 250 vac (cos?=0.4) 2 a 24vdc (0ms) semko en 6058-:992 and a en 6095:993 and a+a 250vac, 12 (3)a 40t70 complies with nemko, demko, fimko 12a type compliance contact rating ftr-kal( ) (w,e)(la, lb)-rg ul ul 508 e6364 flammability: ul 94-vii (plastics) 10a, 277 vac (cos?=1) 1 /2hp, 277vac /3 hp, 25vac pilot duty: b300 csa c22.2 no. 4 lr 40304 vde 0435, 0631, 0700, 0860 10a, 250 vac (cos?=1) 3a, 250 vac (cos?=0.4) semko en 6058-:992 and a en 6095:993 and a+a 250vac, 10 (3)a 40t70 complies with nemko, demko, fimko 10a
9 ftr-k1 series n characteristic data 0 0.2 0.4 0.6 0.8 .2 0 0 20 30 40 50 60 70 80 90 00 0a 6a 0a coil te mperature rise coil power (w) t emperature rise (deg.) 2a 0 2 0 4 0 6 0 8 0 00 0.5 .5 2 2.5 ftr-k( )k 6a 0a must operate voltage (hot coil) must operate voltage (cool coil) ambient temperature (oc) nominal voltage multiplying factor operating range 2a ftr-k al 0 2 0 4 0 6 0 8 0 00 0.5 .5 2 2.5 must operate voltage (hot coil) m ust operate voltage (cool coil) ambient temperature (oc) nominal voltage multiplying facto r operating range 0a 0a 50 20 0 5 2 0.5 0.2 0. 000 500 200 00 50 20 0 ftr-k 6a dc resistive ac resistive contact v oltage (v ) switching current (a ) maximum switching power 0 20 50 00 200 500 000 ftr-k 2a 50 20 0 5 2 0.5 0.2 0. dc resistive ac resistive contact v oltage (v ) switching current (a ) maximum switching power ftr-k 0a 0 20 50 00 200 500 000 50 20 0 5 2 0.5 0.2 0. ac resistive contact v oltage (v ) switching current (a ) maximum switching power 0 2 4 6 8 0 2 4 6 8 20 0 50 00 200 500 000 000 ac250v cos=0. 7 dc24v =7ms ac250v cos=0. 4 dc24v =15ms 20 30 300 ftr-kak (6a) 250v ac resistive 24vdc resistive contact current load (a) service life (0 3 operations) life curve 0 2 4 6 8 0 2 4 6 8 20 0 50 00 200 500 000 000 dc24v resistiv e ac250v cos=0. 7 dc24v =7ms ac250v cos=0. 4 dc24v =15ms 20 30 300 ftr-kck (6a) 250v ac resistive contact current load (a) service life (0 3 operations) life curve 0 3 6 9 2 0 50 00 200 500 000 000 ac250v resistiv e dc24v resistiv e ac250v cos=0.7 dc24v =7ms ac250v cos=0.4 dc24v =15m s 20 30 300 ftr-k -ma,-mb contact current load (a) service life (0 3 operations) life curve ac250v cos=0.4 ac250v cos=0.7 ac250v resistiv e 300 30 20 000 000 500 200 00 50 0 2 0 9 8 7 6 5 4 3 2 0 ftr-k al contact current load (a) service life (0 3 operations) life curve
0 ftr-k1 series 0 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 0 0 20 30 40 50 60 70 80 90 00 ftr-kck02w-rg n=200 nominal v oltage multiplying factor (% ) distribution (%) distribution of operation & release v oltage operate release 0 1 2 3 4 5 6 7 8 9 0 0 0 20 30 40 50 60 70 80 90 00 ftr-kck02w-rg n=200 ti me (ms) distribution (%) distribution of operation & release ti me operate release 0 0 2 0 3 0 4 0 5 0 0 0 20 30 40 50 60 70 80 90 00 ftr-kck02w-rg n=200 contact resistance (m?) distribution (% ) distribution of contact resistance make break 0 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 00 0 0 20 30 40 50 60 70 80 90 00 ftr-kal02w-la n=100 nominal v oltage multiplying factor (% ) distribution (%) distribution of operation & release v oltage operate release 0 1 2 3 4 5 6 7 8 9 0 ftr-kal02w-la n=100 0 0 20 30 40 50 60 70 80 90 00 ti me (ms) distribution (%) distribution of operation & release ti me operate release 0 0 2 0 3 0 4 0 5 0 ftr-kal02w-la n=100 0 0 20 30 40 50 60 70 80 90 00 contact resistance (m?) distribution (% ) distribution of contact resistance make
ftr-k1 series n dimensions l dimensions ftr-k( ) /lb l schematics (bottom view) unit: mm l pc board mounting hole layout (bottom view) ftr-k( )ma /la ftr-k( ) /mb 2.6 12.7 +0.3 7.5 0.9 0.9 15.7 +0.3 29 +0.3 5 5 20 (2.6) 0.5 0.3 0.5 0.45 3.3 (*) 2 3 4 5 7 8 no no com com nc nc (*) (*) orientation mar k 7.5 5 5 20 (2.6) (2.6) 0. 2-1 -0 6-1.3 (*) (*) 12.7 +0.3 7.5 0.9 0.9 15.7 +0.3 29 +0.3 3.5 3.5 20 (2.6) (2.6) 0.5 0.3 0.5 0.45 3.3 (*) pre- solder no nc com 8 5 4 2 6 (*) orientation mar k 3.5 3.5 7.5 20 (12.7) (2.6) (2.6) 2-1 3-1.3 (*) 2.6 12.7 +0.3 7.5 0.9 0.9 15.7 +0.3 29 +0.3 5 5 20 (2.6) 0.5 0.3 0.5 0.45 3.3 (*) 2 3 4 5 7 8 no no com com nc nc (*) (*) orientation mar k 7.5 5 5 20 (2.6) (2.6) 0. 2-1 -0 6-1.3 (*) (*) l dimensions l schematics (bottom view) l pc board mounting hole layout (bottom view) l dimensions l schematics (bottom view) l pc board mounting hole layout (bottom view)
2 ftr-k1 series 1. general information l relays produced after the specifc date code that is indicated on each data sheet are lead-free now. all of our signal and power relays are lead-free. please refer to lead-free status info. (http://www.fujitsu.com/us/downloads/micro/fcai/relays/lead-free-letter.pdf) l lead free solder paste currently used in relays is sn-3.0ag-0.5cu. l all signal and power relays also comply with rohs. please refer to individual data sheets. relays that are rohs compliant do not contain the 5 hazardous materials that are restricted by rohs directive (lead, mercury, chromium iv, pbb, pbde). l it has been verifed that using lead-free relays in leaded assembly process will not cause any problems (compatible). l lf is marked on each outer and inner carton. (no marking on individual relays). l to avoid leaded relays (for lead-free sample, etc.) please consult with area sales offce. l we will ship leaded relays as long as the leaded relay inventory exists. note: cadmium was exempted from rohs on october 2, 2005. (amendment to directive 2002/95/ec) 2. recommended lead free solder profle l recommended solder paste sn-3.0ag-0.5cu. rohs compliance and lead free relay information refow solder condition 3. moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical realys. 4. tin whisker l dipped snagcu solder is known as low risk tin whisker. no considerable length whisker was found by our in house test. we highly recommend that you confrm your actual solder conditions flow solder condition: pre-heating: maximum 120?c soldering: dip within 5 sec. at 260?c soler bath solder by soldering iron: soldering iron temperature: maximum 360?c duration: maximum 3 sec.
3 ftr-k1 series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 4, japan tel: (81-3) 5449-7010 fax: (8-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://www.fujitsu.com/us/services/edevices/components/ europe fujitsu components europe b.v. diamantlaan 25 232 wv hoofddorp netherlands tel: (3-23) 556090 fax: (3-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #0-0 citilink warehouse complex singapore 8529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2008 fujitsu components america, inc. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. fujitsu components america or its affliates do not warrant that the content of datasheet is error free. in a continuing effort to improve our products fujitsu components america, inc. or its affliates reserve the right to change specifcations/datasheets without prior notice. rev. january 28, 2008.

▲Up To Search▲

Price & Availability of FTR-K1AL018W-LB-RG

	To Download FTR-K1AL018W-LB-RG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .